The International Society of Automation (ISA) publishes standards for automation professionals, which are available exclusively through IHS. ISA standards, specifications and recommended practices provide direction for streamlining processes and improving industry safety, efficiency and profitability.
ISA 75.02.01 - Control Valve Capacity Test Procedures
ISA 75.05.01 - Control Valve Terminology-Replaces 75.05-1983
ISA 75.07 - Laboratory Measurement of Aerodynamic Noise Generated by Control Valves
ISA 75.08.01 - Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125 150 250 300 and 600)
ISA 75.08.02 - Face-to-Face Dimensions for Flangeless Control Valves (Classes 150 300 and 600)
ISA 75.08.03 - Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150 300 600 900 1500 and 2500)
ISA 75.08.04 - Face-To-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500)
ISA 75.08.05 - Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 150 300 600 900 1500 and 2500)
ISA 75.08.06 - Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900 1500 and 2500)-Formerly ISA 75.16
ISA 75.08.07 - Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150 300 and 600)
ISA 75.08.08 - Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (ANSI Classes 150 300 and 600)
ISA 75.08.09 - Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150 300 and 600)
ISA 75.10.01 - General Requirements for Clamp or Pinch Valves
ISA 75.10.02- Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150)
ISA 75.11.01 - Inherent Flow Characteristic and Rangeability of Control Valves
ISA 75.13.01 - Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output-Second Printing