BMS Functions in Turbine

The BMS shall be designed to perform the following functions

  1. Prevent firing unless a satisfactory furnace purge has first been completed.

  2. Prohibit start-up of the equipment unless certain permissive interlocks have first been completed.

  3. Monitor and control Monitor and control the correct component sequencing during start the correct component sequencing during start-up and shut up and shut- down of the equipment.

  4. Provide component condition feedback to the operator and, if so equipped, to the plant control systems and/or data loggers.

  5. Provide automatic supervision when the equipment is in service and provide means to make a Master Fuel Trip (MFT) should certain unacceptable firing conditions occur.

  6. Execute a MFT upon certain adverse unit operating conditions…

1 Like